Search

How To Fix WiFi Connected But No Internet Access?


The Internet is one thing without which most of the daily routines can not be run efficiently. For example, not all social networking sites can be reached without an internet connection, not all government websites will be protected by law and order, etc. The internet therefore plays an important role in our everyday lives.


However, there may be cases where the internet connection is temporarily disconnected. Reasons can involve technical error, software error, etc. Some people experience cases where their computer is connected to their WiFi but is unable to access the Internet as it displays a 'no internet' alert. There are a variety of reasons for this mistake.


There are also different ways to solve them. So here's a list of reasons as well as some of the best working methods to solve the 'WiFi Connected but No Internet' problem.There may be a variety of issues with this mistake. Let's think about the most popular ones.


Reason Behind ‘WiFi Connected but No Internet’ issue:


1. Expired Recharge

One of the most common explanations for this is that your WiFi recharge has expired. Most Internet service providers charge a monthly or quarterly fee. However, we do not recall the date when it will expire. It is only after we have contacted the service provider that we know that our recharge has run out of time.


2. Technical error

It is another most prominent explanation why you're facing the problem of 'WiFi Connected but No Internet' on your device. Normally, one uses a router to get an internet connection. WAN wire is also attached to a router that provides the Internet. These hardware components can be faced with technical issues arising from this mistake.


3. Software error

Besides hardware parts, there is also a software error that can trigger the 'WiFi Linked but No Internet' problem on your computer. For example, your firmware may be corrupted or out of date. The configuration reset of your router can be another program mistake.

These were some of the most prominent explanations for the 'WiFi Linked but No Internet' problem.

Working Fix for WiFi Connected but No Internet

Step 1: First, Open Network and Sharing Center from Control Panel.


Step 2: After that Click on Change Adapter Settings.


Step 3: Right-click on your network connection, and then click on Properties Settings.



Step 4: After properties, Click on the Internet Protocol, and then click on Properties.



Step 5: Click on Obtain an “IP Address Automatically” and “Obtain DNS Server Address Automatically


Step 6: Tap on choosing “Advanced



Step 7: Choose the DNS tab and deselect Register This Connection’s Address in DNS.

How to solve the ‘WiFi Connected but No Internet’ issue?

#1 Reboot your Router

The simplest and most important action to take if any system is not functioning as planned is to restart / reboot the particular device. This process is known as a soft-reset process. The likelihood that this problem will be resolved after rebooting your router is very high. If the problem prevails, go to the next step below.


#2 Check the Configuration of Router

Your ISP must enter your router's username, password, and service name. If this information is formatted from your router, you will no longer be able to access the internet on your device. You're going to be wired to your WiFi, though. You may ask your ISP to re-configure your router or test your router configuration backup on your device. If found, use it to configure your router automatically.


#3 Flush your DNS

This mistake is attributed to a large amount of DNS cache. So, to flush your DNS, open the command prompt on your device and type it and use 'ipconfig/flushdns' to flush the DNS immediately.

A lot of users will get a problem only because of the DNS. Let us know in the comment section if you have any issues with DNS.



#4 Hard Reset your Router

If none of the above approaches proves to be effective, you will have a hard time resetting your router. This can be achieved by holding the reset button for 10-15 seconds before the light of your router begins to blink. After you've done this, you need to upgrade your router as a new one. When completed, this issue has to be resolved.

Conclusion:

These were some of the reasons for the 'WiFi Connected but No Internet 2020' problem. We have also given the solutions that you can use to fix this mistake. We hope that you will now be able to use the internet properly without any issues. Each, do you have any problems? Isn't our system of repairing working? Feel free to drop your questions in the comments and we're going to try to help you as effectively as possible.

If you want to support us, please share this article with all your friends and family. You may also look at our social media accounts and offer some support to them. If you have any feedback please feel free to let us know by using our Contact Us link.

59 views0 comments
  • Facebook
  • Twitter
  • Instagram
  • YouTube
  • Pinterest

©2020 by HowToKR